Perfect Guide for Diy Hammock Stand Plans

Mar 27th

Hammock stand plans – today we offer you an entertaining task whose result will give you many moments of relaxation: create a stand hammock. With this, we can enjoy those pleasant moments of tranquility in garden or on porch, at home or in camping. And for that we will only need some tubillos, some slats and climbing rope. Rest, we show you step by step. Our hammock will consist of three pieces, one for feet, another that will make of seat and another one of backup. We will do all three in same way: two tubillones joined by slats. So, first thing we will do is cut tubillones . To perform this task we will use rib saw, which will facilitate straight cut.

Once we have prepared tubillone, proceed to cut slats that. In our case, will be 60 cm: mark measurement. Hold slats to table with two sargent. Then cut with saw of rib and review songs With sander to round them. We have ready elements of first piece of hammock stand plans. Next thing we will do is present slats and tubillones and mark their position. We must bear in mind that all pieces must be join. So that at ends of joints we will place first ribbon leaving a space of six cm. It is time to screw slats to tubillones : we place them in their corresponding position. And we make holes with drill provided with a countersinking tip.

RELATED |  Children's Hammock: Favorite Place for Reading

We will use this type of drill bit so that screws are perfectly inlaid. After finishing three pieces, we will pass through them pieces of climbing rope that will allow us to hang hammock from wherever we want. For this, we will make corresponding holes in ends of all tubillones. First we will drill with a fine drill and later we will use definitive drill, of about 11mm of diameter. At time of creating hammock , as we have had to cut rope in pieces of 1.75m and ends has frayed. We will heat them and we will sand them until they tip them. So they will easily pass through holes of tubillones.

Finish our hammock by joining three pieces. We will do this in following way: we will make holes in all ends of tubillones in which we have left 6 cm of margin. And we will pass by them a finer rope that will do same function as a hinge. And in this simple way, we have already learned how to create a perfect hammock stand plans to enjoy a summer nap in our favorite corner.