Ideas Painting Old Kitchen Cabinets

Mar 2nd

Painting old kitchen cabinets – Whether your home is old or new, you can bring outdated charm in your kitchen with a simple faux finishing technique. It uses a liquid medium called crackle, along with two shades of paint, provides a cracked finish that resembles an old worn out, making new cabinets look at just one weekend. If your kitchen cabinets are old but unattractive, a final crunch will make it interesting and palatable once again. Tape painter use, if necessary, to protect your paint ceiling. If your cabinets go all the way to the ceiling, press the blue ribbon on the ceiling where you find the cabinets to hold the paint. Use a screwdriver or drill to remove cabinet hardware; set aside until the end of the project.

Painting old kitchen cabinets, place a drop cloth down where you will be painting the closet doors, be it the garage or another room in your home. If you have easels or worktables, place the doors on the top of the painting to save the flex back. Use a screwdriver or drill to remove cabinet doors. Take them to the designated place of the painting. Use spackle to repair any blatant gouges or scratches on the surface of cabinet doors or frames. Apply the joint compound with a spatula gently as possible and leave it dry.

RELATED |  Chalk Paint Bookcase Tips for a Home Office

Use fine-grained sandpaper to level the areas sellable and rough the surface of your cabinet doors and frames. You will sand lightly to help the paint adhere better. Do not try to remove the finish. Wipe frames and doors with a paper towel to remove any sanding dust. Roll over the layer with a small sponge roller. Allow to dry completely before continuing. Follow the paint manufacturer’s direction during drying times.

Painting old kitchen cabinets roll in a uniform layer of medium creak. The label will advise how much to expect before applying the top layer, but in general, you should not wait until the surface feels more tacky, one or two hours after applying. Do not let it dry completely. Roll on top coat of paint. For smaller cracks, apply less paint using a sponge roller. If you want large cracks, use a brush to apply the paint to a thicker layer. Paint in only one direction and do not overlap the strokes. Let it dry. Apply two water-based polyurethane layers, if desired, to protect your new imitation finish. Slightly in the sand between layers for a professional image. Reattach cabinet doors and hardware.